The security that comes with being able to control who comes into your building along with the ability to verbally and visually confirm their identity is immeasurable. Akuvox's Video Doorphone E11R enables you to easily monitor an entrance door or gate and gives you the peace of mind knowing that your facility is more secure.
|
Physical & Power
Front panel: Plastic
Camera: 2M pixels, automatic lighting
Button: 1 call button
Light sensor: Support
Infrared sensor: Support
Wiegand port: Support
RF card reader: 13.56MHz & 125kHz
Relays out: 2
Inputs: 2
Microphone: -40dB
Speaker: 4Ω / 3W
Ethernet port: RJ45, 10/100Mbps adaptive
802.3af Power-over-Ethernet
12V DC connector (if not using PoE)
Installation: Flush-mounted or Wall-mounted
Flush-mounted DIM: 189x120x56.5mm
Wall-mounted DIM: 145x85x27.5mm
Working Humidity: 10~90%
Working Temperature: -20°C ~ +65°C
Storage Temperature: -40°C ~ +70°C
Audio
SIP v1 (RFC2543), SIP v2 (RFC3261)
Narrowband audio codec: G.711a, G.711μ, G.729
Broadband audio codec: G.722
DTMF: In-band, out-of-band DTMF (RFC2833), SIP Info
Echo Cancellation
Video
Sensor: 1/2.7”, CMOS
Pixels: CIF, QCIF, VGA, 4CIF, 720p
Video codec: H.264
Video resolution: up to 1280x720p
Max. image transfer rate: 720p – 30fps
Viewing angle: 116°(H) / 60°(V)
High intensity IR LEDs for picture lighting during dark hours with internal light sensor
Networking & Protocol
Protocols support: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP
Application Scenarios
Office door phone with on-site or hosted IP-PBX
Remote site entry over Internet
Apartment/flat intercom with door access control